This product is a prefabricated waterproofing based on oxidized bitumen, which is reinforced with a layer of fiberglass tissue (glass fiber felt) and a layer of non-woven polyester.

types of

  1. Two simple layers: Simple two-layer isogum is suitable in cases where it is covered on insulation after installation.

۲. Two-layer with aluminum foil coating: Aluminum foil coated isogum is used in cases where insulation without other coatings is installed and aluminum foil reflects the sun’s UV rays and also reduces heat absorption on the roof or wall of the building.

life span

The longevity and reliability of this product have been proven after years of production in East Izogam factories and installation all over the country.

Compounds

In the production of this product, no recycled materials and wastes are used and the bitumen used in this insulation is a combination of petroleum bitumen produced by the country’s refineries and also the refineries of the East Izogam complex, which is produced with the formulation of this company.

Installable surfaces

This product can be installed on concrete, metal, stone and brick surfaces.

Install insulation

For information on the installation method, refer to the installation standard of waterproofing.

Standard

This product is produced based on the standard requirements of water quality assurance standard No. 3885-3 of Iran Institute of Standards and Industrial Research.

Warehousing and maintenance

    Insulation rolls should be placed upright and on a flat surface.

    Do not store in direct sunlight.

Caution

Wear safety equipment such as helmets, gloves and seat belts when installing insulation.

Before installing the insulation, make sure that the work surface and the concrete of the structure are dry so that the insulation does not separate from the work surface after installation due to the release of vapors from moisture evaporation.

After installing the insulation, if the construction operation continues, the insulation surface should be covered to prevent damage to the insulation.

Application

This product is used in waterproofing of all building surfaces, including flat and sloping roofs, walls, bathrooms and kitchens, foundations, swimming pools and fountains, etc.

Advantages

Raw material

The raw materials used in the production of this insulation are produced in the Eastern isogum complex and in compliance with all standards.

Insurance

This product has Iran Insurance Quality Assurance Insurance for 10 years.

instructions

Technical Specifications

Value attribute name

Thickness 4.0.2 mm

Length 10.0.1 m

Width 1.01 m

Level unit weight 4.1 ۰ 0,2 Kg / m 2

Longitudinal tensile strength 40 Kgf / 5cm

Transverse tensile strength 30 Kgf / 5cm

Percentage increase in relative length (longitudinal) 25%

Percentage increase in relative width (transverse) 25%

Length rupture resistance (minimum) 12 Kgf

Width rupture resistance (minimum) 10 Kgf

Flexibility in cold 0 ° C

Thermal stability (minimum) + 100 ° C

Water permeability of 60 kPa