This product is a prefabricated waterproofing based on bitumen modified with plastic polymers, which is flattened with a layer of fiberglass tissue (glass fiber felt) and a layer of non-woven polyester.
types of
- Plain: Plain isogum is suitable in cases where it is covered on insulation after installation.
۲. Aluminum Foil Coating: Isogum with aluminum foil coating is used in cases where insulation without other coatings is installed, and aluminum foil reflects the sun’s UV rays and also reduces heat absorption on the roof or wall of the building.
life span
The longevity and reliability of this product have been proven after years of production in East Izogam factories and installation all over the country.
Compounds
In the production of this product, a combination of petroleum bitumen and plastic polymers and other additives designed by the formulation of Izogam Shargh Company is used.
Insurance
This product has Iran Insurance Quality Assurance Letter for 7 years.
Installable surfaces
This product can be installed on concrete, metal, stone and brick surfaces.
Install insulation
For information on the installation method, refer to the installation standard of waterproofing.
Standard
This product is produced based on the standard requirements of water quality assurance standard No. 3885-3 of Iran Institute of Standards and Industrial Research.
Warehousing and maintenance
Insulation rolls should be placed upright and on a flat surface.
Do not store in direct sunlight.
Caution
Wear safety equipment such as helmets, gloves and seat belts when installing insulation.
Before installing the insulation, make sure that the work surface and the concrete of the structure are dry so that the insulation does not separate from the work surface after installation due to the release of vapors from moisture evaporation.
After installing the insulation, if the construction operation continues, the insulation surface should be covered to prevent damage to the insulation.
Application
This product is used in waterproofing of all building surfaces, including flat and sloping roofs, walls, toilets and kitchens, foundations, swimming pools and water fountains, and so on.
Advantages
instructions
Technical Specifications
Thickness 4.0.2 mm
Length 10.0.1 m
Width 1.01 m
Level unit weight 4.1 ۰ 0,2 Kg / m 2
Longitudinal tensile strength 40 Kgf / 5cm
Transverse tensile strength 30 Kgf / 5cm
Percentage increase in relative length (longitudinal) 25%
Percentage increase in relative width (transverse) 25%
Length rupture resistance (minimum) 12 Kgf
Width resistance (minimum) 12 Kgf
Flexibility in cold +5 ° C
Thermal stability (minimum) + 120 ° C
Water permeability of 60 kPa
