This product is a prefabricated waterproofing based on bitumen modified with elastic polymers, which is reinforced with a layer of spunbond and a layer of non-woven polyester.

Types of isogum modified with elastic polymer

  1. Simple: Simple isogum is suitable in cases where it is covered on insulation after installation (for example, tiling the roof after isogum).

۲. Aluminum Foil Coating: Aluminum foil coated isogum is used in cases where insulation without other coatings is installed and aluminum foil reflects the sun’s UV rays and reduces heat absorption on the roof or wall of the building.

Warehousing and maintenance

    Insulation rolls should be placed upright and on a flat surface.

    Do not store in direct sunlight.

Caution

Wear safety equipment such as helmets, gloves and seat belts when installing insulation.

Before installing the insulation, make sure that the work surface and the concrete of the structure are dry so that the insulation does not separate from the work surface after installation due to the release of vapors from moisture evaporation.

After installing the insulation, if the construction operation continues, the insulation surface should be covered to prevent damage to the insulation.

East Insulator (Self-Adhesive Insulation Tape)

Self-adhesive insulation tape is a bitumen-based polymer insulation that is produced with different widths from 5 to 100 cm, which has many applications for insulating pipes as well as sealants.

Warehousing and maintenance

Do not expose the insulation tape to direct sunlight. Avoid detaching and damaging the insulating tape protective film.

Eastern ISO polymer (blue primer)

This product is a water-based bitumen primer that is used to prepare the work surface before installing the waterproofing. This product increases the quality of installation and the life of waterproofing by absorbing surface dust and strengthening the work surface.

 

ISO polymer (polymer resistant bitumen)

This product is 60/70 optimized bitumen or elastic polymers, which with high adhesion and elasticity is one of the best materials available for insulation of all building surfaces. Prevents the penetration of water, moisture and vapors to the surface, which is produced in two types, cold run and hot run. Eastern ISO polymer is produced in 15 kg carton packaging, 15 liter bucket and 170 liter barrel.