Today, there are several companies in the field of isogum production, including the best isogum production company, East Isogam. Isogams are divided into two categories: elastic polymer isogams and plastic polymer isogams, which are among the best types of isogams. These isogams are composed of different layers that can well protect your building from water penetration and increase the life of materials. In this article, we will examine the best type of isogum together.

Familiarity with the best type of isogum

Aluminum foil isogum

Foil isogum is one of the best isogams available for roof insulation, and the aluminum foil on it protects the isogams from cold and heat. These foils are made of aluminum and do not rust due to moisture and prevent contamination from sticking to the isogum. These foils also reflect the sun’s rays and prevent the bitumen from loosening the isogum.

Aluminum foil isogum

What is the best brand of isogum?

Izogam Shargh is one of the best and most reputable companies for the production of various types of waterproofing, which uses the best first-class raw materials for its Izogams. Izogam Shargh is very well known and most of the products of this factory are exported to other countries. When buying isogum Shargh, you should pay close attention to the hologram on it so that the purchased product is original and has the desired quality.

The best type of isogum for the roof

Infiltration of moisture and humidity into the building can cause serious damage to the building and reduce its life, and this is where the role of isogams in construction is determined. In fact, isogum is a roofing material that protects your building from damage. The best type of isogum for the roof depends on the climatic conditions of each area, and the isogams must be able to adapt to any type of climate. Isogums are usually made of polymer bitumen, the quality of which is different from each other, and in order to best protect your roof and increase the life of the building, it is better to use the best isogum.

The best type of isogum for the roof

The price of the best type of isogum

Isogums are calculated in rolls and each company sells its products at different prices depending on the materials used in construction and other features. Fortunately, East Izogam factory sends all its products directly to its customers, so East Izogam has a reasonable price. You can view the price of the best type of isogum on the isogum Shargh website or contact the numbers listed on the site.

The best type of isogum for the pool

Insulation of swimming pools is one of the topics that has received a lot of attention in recent years due to the problem of dehydration. Plastic polymer insulation is usually used to cover the surface of swimming pools, one of the most popular and widely used is geomembrane. Pool isogams can be selected from colored and patterned type to not only prevent water wastage, but also to make the pool look more beautiful.

The best type of isogum for the pool

The best isogum for tropical regions

Isogums for tropical regions consist of high quality and pure bitumen. Tropical isogams have a layer of foil that reflects the sun’s rays to prevent the bitumen from loosening and will not lose its quality and strength. Plastic polymers are used to produce tropical isogams. Eastern isogum uses the best and most desirable materials in the production of tropical isogams to increase the life of this product and to protect the structures of your building against moisture and heat.

The best isogum for cold regions

Usually, isogums are produced in two types of elastic and plastic according to the weather conditions, and elastic polymer isogams are a very suitable option for cold climates. These isogams have a low thickness and have a very high resistance to be able to well protect your building from moisture and water penetration. Cold waterproofing is very flexible and can be installed on all roofs. East isogum To make these isogams, a special formulation is used to be very high quality and have a long life. These isogams are very suitable for covering the roofs of buildings in cold regions.

You can get installation and sales services of Airogam Shargh, Geomembranes, Izogam in cold regions and…. Contact the experts of the collection.

Waterproofing of isogum modified with plastic polymers

This product is a prefabricated waterproofing based on bitumen modified with plastic polymers, which is flattened with a layer of fiberglass tissue (glass fiber felt) and a layer of non-woven polyester.

types of

  1. Plain: Plain isogum is suitable in cases where it is covered on insulation after installation.

۲. Aluminum Foil Coating: Isogum with aluminum foil coating is used in cases where insulation without other coatings is installed, and aluminum foil reflects the sun’s UV rays and also reduces heat absorption on the roof or wall of the building.

life span

The longevity and reliability of this product have been proven after years of production in East Izogam factories and installation all over the country.

Compounds

In the production of this product, a combination of petroleum bitumen and plastic polymers and other additives designed by the formulation of Izogam Shargh Company is used.

Insurance

This product has Iran Insurance Quality Assurance Letter for 7 years.

Installable surfaces

This product can be installed on concrete, metal, stone and brick surfaces.

Install insulation

For information on the installation method, refer to the installation standard of waterproofing.

Standard

This product is produced based on the standard requirements of water quality assurance standard No. 3885-3 of Iran Institute of Standards and Industrial Research.

Warehousing and maintenance

    Insulation rolls should be placed upright and on a flat surface.

    Do not store in direct sunlight.

Caution

Wear safety equipment such as helmets, gloves and seat belts when installing insulation.

Before installing the insulation, make sure that the work surface and the concrete of the structure are dry so that the insulation does not separate from the work surface after installation due to the release of vapors from moisture evaporation.

After installing the insulation, if the construction operation continues, the insulation surface should be covered to prevent damage to the insulation.

Isogum waterproofing based on oxidized bitumen

This product is a prefabricated waterproofing based on oxidized bitumen, which is reinforced with a layer of fiberglass tissue (glass fiber felt) and a layer of non-woven polyester.

types of

  1. Two simple layers: Simple two-layer isogum is suitable in cases where it is covered on insulation after installation.

۲. Two-layer with aluminum foil coating: Aluminum foil coated isogum is used in cases where insulation without other coatings is installed and aluminum foil reflects the sun’s UV rays and also reduces heat absorption on the roof or wall of the building.

life span

The longevity and reliability of this product have been proven after years of production in East Izogam factories and installation all over the country.

Compounds

In the production of this product, no recycled materials and wastes are used and the bitumen used in this insulation is a combination of petroleum bitumen produced by the country’s refineries and also the refineries of the East Izogam complex, which is produced with the formulation of this company.

Installable surfaces

This product can be installed on concrete, metal, stone and brick surfaces.

Install insulation

For information on the installation method, refer to the installation standard of waterproofing.

Standard

This product is produced based on the standard requirements of water quality assurance standard No. 3885-3 of Iran Institute of Standards and Industrial Research.

Warehousing and maintenance

    Insulation rolls should be placed upright and on a flat surface.

    Do not store in direct sunlight.

Caution

Wear safety equipment such as helmets, gloves and seat belts when installing insulation.

Before installing the insulation, make sure that the work surface and the concrete of the structure are dry so that the insulation does not separate from the work surface after installation due to the release of vapors from moisture evaporation.

After installing the insulation, if the construction operation continues, the insulation surface should be covered to prevent damage to the insulation.

Waterproofing of isogum modified with elastic polymers

This product is a prefabricated waterproofing based on bitumen modified with elastic polymers, which is reinforced with a layer of spunbond and a layer of non-woven polyester.

Types of isogum modified with elastic polymer

  1. Simple: Simple isogum is suitable in cases where it is covered on insulation after installation (for example, tiling the roof after isogum).

۲. Aluminum Foil Coating: Aluminum foil coated isogum is used in cases where insulation without other coatings is installed and aluminum foil reflects the sun’s UV rays and reduces heat absorption on the roof or wall of the building.

Warehousing and maintenance

    Insulation rolls should be placed upright and on a flat surface.

    Do not store in direct sunlight.

Caution

Wear safety equipment such as helmets, gloves and seat belts when installing insulation.

Before installing the insulation, make sure that the work surface and the concrete of the structure are dry so that the insulation does not separate from the work surface after installation due to the release of vapors from moisture evaporation.

After installing the insulation, if the construction operation continues, the insulation surface should be covered to prevent damage to the insulation.

East Insulator (Self-Adhesive Insulation Tape)

Self-adhesive insulation tape is a bitumen-based polymer insulation that is produced with different widths from 5 to 100 cm, which has many applications for insulating pipes as well as sealants.

Warehousing and maintenance

Do not expose the insulation tape to direct sunlight. Avoid detaching and damaging the insulating tape protective film.

Eastern ISO polymer (blue primer)

This product is a water-based bitumen primer that is used to prepare the work surface before installing the waterproofing. This product increases the quality of installation and the life of waterproofing by absorbing surface dust and strengthening the work surface.

 

ISO polymer (polymer resistant bitumen)

This product is 60/70 optimized bitumen or elastic polymers, which with high adhesion and elasticity is one of the best materials available for insulation of all building surfaces. Prevents the penetration of water, moisture and vapors to the surface, which is produced in two types, cold run and hot run. Eastern ISO polymer is produced in 15 kg carton packaging, 15 liter bucket and 170 liter barrel.